NEC ME342U User Manual page 53

5. Remove the USB memory from the projector.
NOTE:
If you remove a USB memory from the projector without executing
[REMOVE USB DEVICE] in the menu, the operation of the projector
may become unstable. In that case, turn off the power of the
projector once and unplug the power cord from the outlet.
Subsequently, wait for about 3 minutes before connecting the
power cord to the socket and turning on the power of the projector.
③ End the VIEWER
1. Press the MENU button in the slide screen or file list
screen.
A control bar or a pop-up menu will be displayed.
2. Press the MENU button again.
The [INPUT] screen is displayed.
3. Move the cursor to an input terminal other than
[USB-A] and press the ENTER button.
The VIEWER will end.
TIP:
• W hen using the remote control, press the HDMI 1 button etc. to end the VIEWER.
42
4. Using the VIEWER