NEC ME342U User Manual page 81

Selecting Signal Format [SIGNAL SELECT]
[COMPUTER]
Allows you to choose [COMPUTER] for an RGB source such as a computer, or [COMPONENT] for a component
video source such as a DVD player. Normally select [RGB/COMPONENT] and the projector automatically detects a
component signal. However there may be some component signals that the projector is unable to detect. If this is
the case, select [COMPONENT].
Enabling or Disabling WXGA Mode [WXGA MODE]
Selecting [ON] will give priority to WXGA (1280 × 800)/WUXGA (1920 × 1200) signals in recognizing an input signal.
When [WXGA MODE] is set to [ON], XGA (1024 × 768)/UXGA (1600 × 1200) signals may not be recognized on ME402X/
MC422X/MC372X/MC342X/MC302X. In this case, select [OFF].
NOTE:
• [OFF] is selected at the time of shipment of ME402X/MC422X/MC372X/MC342X/MC302X.
• [ON] is selected at the time of shipment of ME382U/ME342U/ME372W/MC382W/MC332W.
Enabling the deinterlace [DEINTERLACE]
Turns on or off the deinterlace function for a telecine signal.
OFF ��������������������������Select this option if there is any jitter or artifacts in video�
ON ���������������������������Default standard setting�
NOTE: This feature is not available for HDTV (progressive) and computer signals.
Setting Video Level [VIDEO LEVEL]
Selection of the video signal level when connecting an external device to the HDMI 1 IN terminal or HDMI 2 IN terminal
of the projector.
AUTO �����������������������The video level is switched automatically based on the information from the device outputting the signal�
Depending on the connected device, this setting may not be made properly� In this case, switch to "NORMAL" or
"ENHANCED" from the menu and view with the optimum setting�
NORMAL ������������������This disables the enhanced mode�
ENHANCED ���������������This improves the image's contrast, expressing the dark and light sections more dynamically�
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when an error occurs or the following operations are performed.
- Displaying the main menu
- Switching sources
- Resetting data by using [RESET]
- Pressing POWER ON or STANDBY button
TIP:
• Volume control for [BEEP] is disabled. AV-MUTE button is not effective to stop beeping sound. If you want to activate BEEP function, set
[BEEP] to [OFF].
70
5. Using On-Screen Menu