NEC ME342U User Manual page 52

11. Press the ▶ button to move the cursor to
press the ENTER button.
The picture will rotate clockwise by 90°.
• Every time you press the ENTER button in this state,
the picture rotates 90° clockwise.
12. Press the ▶ button to move the cursor to
press the ENTER button.
The control bar disappears.
13. Press the EXIT button.
The display changes to the file list screen.
• You can also move the cursor to
of the step 10 and press the ENTER button to change
the file list screen.
• To return to the slide screen from the file list screen,
move the cursor to the picture to be displayed in the
slideshow and press the ENTER button.
② Remove the USB memory
1. Press the MENU button in the file list screen or drive
list screen.
A pop-up menu will be displayed at the bottom left of the
screen.
• Press the MENU button while the pop-up menu is
being displayed to display the [INPUT] screen. When
you press the MENU button again, the [INPUT] screen
disappears.
• When you press the EXIT button while the pop-up
menu is being displayed, the pop-up menu disappears.
2. Move the cursor to [REMOVE USB DEVICE] and press
the ENTER button.
A confirmation message will be displayed in the center of
the screen.
3. To remove the USB memory, press the ◀ button to
move the cursor to [OK] and press the ENTER button.
The message displayed in the center of the screen
changes.
4. Press the ENTER button.
, then
, then
with the control bar
41
4. Using the VIEWER