NEC ME342U User Manual page 114

Item name
PJLink
ALERT MAIL
CRESTRON
Set the PJLink password.
PASSWORD Set the PJLink password.
SETTINGS
• Initial value: Blank
• Allowable characters: alphanumeric characters
• N umber of characters: 0–32 characters
Set alert mail and perform a transmission test.
ALERT MAIL Select whether or not to send an alert mail when an alert target
event occurs in the projector.
• Initial value: OFF (do not transmit)
SENDER'S Set the sender's address when sending E-mail from the
ADDRESS projector.
• Initial value: Blank
• A llowable characters: alphanumeric characters, symbols
• Number of characters: 0–60 characters
SMTP SERVER Set the SMTP server of the network to connect to the
NAME projector.
• Initial value: Blank
• A llowable characters: alphanumeric characters, symbols
• Number of characters: 0–60 characters
RECIPIENT'S Set the destination address to send E-mail from the projector
ADDRESS 1/2/3 (maximum 3).
• Initial value: Blank
• A llowable characters: alphanumeric characters, symbols
• Number of characters: 0–60 characters
TEST MAIL Send a test mail according to the settings.
Set the CRESTRON function.
Crestron Room Select whether to use Crestron Room View or not.
View
• Initial value: OFF (do not use)
Crestron Control Select whether to use Crestron Control or not.
• Initial value: OFF (do not use)
IP ADDRESS Set the Crestron Control's IP address.
• Initial value: 192.168.0.100
• Allowable characters: alphanumeric, period
• Number of characters: 7–15 characters
IP ID Set the Crestron Control's IP ID.
• Initial value: 5
• Allowable characters: alphanumeric
• Input character range: 3–65535
• Number of characters: 1–5 characters
Description
When a password is set, a number of asterisks "*" equiva-
lent to the number of characters is displayed.
Crestron Room View
Crestron Control
103
7. Connecting to a Network