NEC ME342U User Manual page 113

⑤ MultiPresenter
Set the MultiPresenter operation.
Item name
MODE
PIN TYPE
PIN CODE
UTILIZE PIN CODE
AS CONNECTION
PASSWORD
COMMUNICATION SPEED
LIMIT
GET APPS GUIDE
CONNECTION STEP
GUIDE
CONNECTION
INFORMATION
CONNECTION
INFORMATION
⑥ NETWORK SERVICE
Configure the AMX BEACON, HTTP SERVER, PJLink, ALERT MAIL, CRESTRON and other settings.
Item name
AMX BEACON
HTTP SERVER
Select FREE mode or MANAGED mode.
When you are in the MANAGED mode, you can change the split pattern of the
screen by pressing the ENTER button on the remote control of the projector while
projecting the MultiPresenter screen.
• Initial value: FREE
NOTE:
• The mode setting is applied when all connections are cut off.
Select ONE-TIME or STATIC.
• Initial value: ONE-TIME
• A ONE-TIME PIN code will be generated automatically, so the "PIN CODE" can-
not be entered for the next item.
• For STATIC, enter an arbitrary PIN code.
Enter a PIN code for [STATIC].
• Initial value: 4-digit random number
• Allowable characters: numeral
• Number of characters: 4 characters (0000–9999)
Select not to use the PIN code as a password (OFF), or to use the PIN code as a
password (ON).
• Initial value: ON
Set the upper limit of the communication speed that MultiPresenter uses for trans-
mission.
• Initial value: DISABLE
START-UP SCREEN
Select whether or not to display the Get MultiPresenter display on the start-up
screen.
• Initial value: ON (display)
Select whether or not to display the connection procedure on the start-up screen.
• Initial value: ON (display)
Select whether or not to display the connection information on the start-up screen.
• Initial value: ON (display)
MultiPresenter SCREEN
Select whether or not to display the connection information in the screen when
MultiPresenter is connected.
• Initial value: ON (display)
Select whether or not to transmit AMX beacons.
• Initial value: OFF (do not transmit)
Set the password to log into the projector's HTTP server.
• Initial value: Blank
• Allowable characters: alphanumeric symbols
• N umber of characters: 0–10 characters
When a password is set, a number of asterisks "*" equivalent to the number of
characters is displayed.
Description
Description
102
7. Connecting to a Network