Troubleshooting Guide - Wolf IF15/S Use & Care Manual

Troubleshooting Guide

Troubleshooting
If your Wolf fryer module is not operating properly, use the
following troubleshooting guide before calling your Wolf
authorized service center. This guide will save you time
and trouble and may help you avoid the expense of a
service call.
Fryer module does not operate.
• Module is in lock mode. Touch and hold the key
symbol for 3 seconds to unlock the control panel.
• Check the household fuse or circuit breaker to see if it
has been blown or tripped. A power outage may also
have caused a disruption in service.
• Verify that the electrical connection to the module has
not been disconnected.
"LO" appears in the temperature display.
• Fryer module was started with too little or no oil in the
fryer basin. Power to the heating element is automati-
cally turned off. Refer to oil level on page 11.
• During use, oil level has dropped too low or sediment
has accumulated in the fryer basin. Power to the
heating element is automatically turned off. Refer to
oil level on page 11.
21
wolfappliance.com