Advanced Tabs; Data; Focus - CamRanger User Manual

Advanced Tabs
There are four tabs providing advanced informaPon or controls: Data, Focus, Timer, and HDR.
An addiPonal Tripod or StackShot tab is visible when the respecPve accessory is connected.

Data

The data tab shows an RGB histogram and meta-data associated with the image in the main
image view. The following meta-data is provided:
• ShuUer Speed
• Aperture
• MegaPixels (Note this is not file size, but image resoluPon)
• ISO
• Metering Mode
• Exposure CompensaPon Value
Within live view, the data tab will simply inform the user that live
view is on and provide a toggle switch to toggle the display of the
histogram. The histogram is updated in real-Pme, but at the cost
of slowing down the frame rate.

Focus

The focus tab is only enabled during live view and provides
advanced focusing controls.
Focus Adjust
There are two sets of buUons to move the lens' focal plane
nearer or further from the camera. Each set has three buUons
with different sized arrows to specify a large, medium, or small
step in focus. Tap the buUon to move the focus by a single
increment, holding down the buUon will have no affect.
Focus Stacking
Focus stacking is a process of taking mulPple captures with slight
changes in focus and then post processing them to enhance the
depth of field. The automaPc focus-stacking feature allows the
user to set the focus step size between in each shot and the number of shots to take. Each focus
step will move the focal plane further from the camera. So the user will want to set the focus to
the nearest plane desired to be in focus and start the stacking process from there. If too few
captures are taken, the process can be restarted from where the iniPal stacking ended. Note:
the post processing is not done within the CamRanger applicaPon.
© CamRanger – Patent Pending
9