Exposure Compensation & Bracketing; Camera Actions; Capture - CamRanger User Manual

Exposure Compensa5on & Bracke5ng
By clicking the brackePng buUon, the following controls will be displayed:
Clicking the arrows at the top right and leh moves the exposure compensaPon. Holding down
the arrow will move the exposure compensaPon to its respecPve limit. The two buUons at the
middle control the brackePng amount. Clicking the arrows poinPng in will reduce the brackePng
amount, while pressing the arrows point outward will increase the brackePng amount.
The brackePng is not set unPl the "Set" buUon is pressed. The "Close" buUon will dismiss the
dialog. Pressing "Close" without pressing "Set" will effecPvely cancel any adjustments made.
Camera Ac0ons

Capture

• The "Capture" buUon iniPates the camera trigger. The exact camera behavior is dependent on
the camera and camera properPes, most importantly the capture mode.
• For most capture modes, such as single, Pmer, or quiet the buUon performs the image
capture as expected. It should be noted that for some cameras, advanced modes such as
remote or Pmer the buUon will behave as single capture mode.
• ConPnuous capture mode differs between Nikon and Canon.
• Nikon: Aher selecPng a conPnuous drive mode a dialog is displayed allowing the user to select
the number of images to capture. When the Capture buUon is pressed, that number of
images will be captured.
• Canon: When in a conPnuous mode, pressing and holding the Capture buUon behaves in the
same way as pushing the physical trigger on the camera.
• It is noted that there can be a very slight lag between the pressing of the "Capture" buUon
and the image capture. The delay can be more pronounced while live view is acPve. For Pme
© CamRanger – Patent Pending
13