File: Saving & Sharing Options; Connection - CamRanger User Manual

Viewing
• Name: Displays the images file name at the boUom leh of each image
• Grid Lines: Overlay a 3x3 grid over the main image view
• Aspect Ra0o: Overlays red lines over the main image view to give the user visual feedback on
common cropping raPos. Note: this informaPon is not saved with the image.
• Nikon RAW (NEF) Quick View: The NEF files will be viewed as a compressed JPG image
• Image Overlay: Browse to select a parPally transparent image to be used as an overlay for
both live view and sPll images
Controls
HDR Start Value: Specifies where the selected HDR property value is within the bracket, at the
most exposed point (Highlights), least exposed point (Shadows) or in the middle (Mid-
Point).HDR Start Value: Specifies where the selected HDR property value is within the bracket,
at the most exposed point (Highlights), least exposed point (Shadows) or in the middle (Mid-
Point).
Sharing
Refer to the CamRanger Share sec*on of this manual on page 20 for more informaPon about
the sharing features.
Watermark
• Watermark: Insert text here to use for the watermark.
• Show Watermark: Displays a watermark over each full size image. When the watermark is
enabled and the user is sharing images to mulPple devises, the watermark will be displayed
on the shared devices.
• Watermark Loca0on: Specifies the locaPon of the watermark: Center, BoUom-Right or
BoUom-Leh.
File: Saving & Sharing Op5ons
• The "Save and "Save as" opPons are beneficial for users who do not want all images captured
to be saved onto the Mac.
• Save: The image displayed on the main viewing screen can be saved to the default
directory by selecPng "File" on the Mac CamRanger menu bar followed by "Save."
• Save as: The image displayed on the main viewing screen can be saved to any directory
and any name by selecPng "File" on the Mac CamRanger menu bar followed by "Save."
• Images can also be auto-saved to the Mac computer via the CamRanger Preferences.
• Image Share: When sharing is enabled, the CamRanger user can chose to share individual
images being viewed in the main image view by selecPng "Share" from the File drop down.
Connec0on
• CamRanger ConnecPon: A state dependent "Connect" or "Disconnect" buUon is available to
the user as a troubleshooPng opPon to avoid closing the applicaPon in the case of connecPon
problems.
• Nikon ConnecPon Mode
• Aher selecPng "ConnecPon" on the menu bar, the opPons of "PC" and "Camera" are in
the dropdown.
© CamRanger – Patent Pending
16