criPcal applicaPons, a remote trigger, such as an RF trigger, can be used in combinaPon with
the CamRanger.
Auto / Manual Focus Toggle
• The AF/MF Focus toggle buUon allows the user to change the focusing between auto and
manual without having to physically adjust the camera.
• This
AF/MF adjustment is not possible for all cameras in all modes. For example, some Nikon cameras
to be connected in "PC" mode,
are required
Mac CamRanger menu
• Aher any touch or incremental focusing while in live view, the focus mode will automaPcally
aUempt to switch to manual focus such that the user specified focus is not overridden by auto
focus upon capture.
Live View
• The "Live View" toggle buUon is used to turn live view on and off.
• When live view is on, the main image view is updated with live view images as well as
updaPng the RGB histogram in the Data tab if the live view histogram is turned on.
• Note: running live view is relaPvely intensive and there may be slight performance lags in
other areas.
Movie Mode
• The "Movie Mode" toggle buUon is used to turn live view on and off, but within movie mode.
• When movie mode is on, the main image view is updated with the live images.
• The "Capture" buUon changes to "Record" and pressing the "Record" buUon will start and
then stop the recording of a movie.
• Note: movies cannot be downloaded to the Mac using the CamRanger.
© CamRanger – Patent Pending
which is accessible by selecPng "Connect
bar followed by clicking "PC
."
ion" on the
14