Network Bridging - CamRanger User Manual

Network Bridging
To set up network bridging the CamRanger must have firmware 6 and up and the CamRanger
Sejngs applicaPon must be downloaded on the Mac computer.
Refer to www.CamRanger.com/downloads for the CamRanger firmware update and for the
CamRanger Sejngs applicaPon and user manual to establish bridging on the Mac. For further
guidance, a YouTube CamRanger Sejngs applicaPon user video is available. Note that to bridge
networks it is recommended to be familiar with Internet networking.
Network bridging allows the user to be connected to the CamRanger and an addiPonal Internet
network simultaneously. Previously when using the CamRanger, the Mac could only be
connected to the CamRanger WiFi network, making it so the user could not use any other
network when the CamRanger was in use. Once the bringing is established on the Mac, the
CamRanger can be connected to the Mac and successfully bridge between the CamRanger and
addiPonal network.
19
© CamRanger – Patent Pending