Playback - ETC Express 24/48 Quick Manual

Playback

Cue playback takes place in the AB and CD Fader pairs in single-scene mode, or just the
CD Fader pair in two-scene operation. Playback is controlled by the [Go], [Clear], [Hold],
[Back] and [Rate] keys.
•
•
•
•
•
16
Play a cue Press {Stage} [Cue] [#] [Go], using the [Go] key of the AB or CD
faders. To playback the cue using the recorded timing, move
both fader sliders to level 10 before you press [Go]. If playing
back in manual timing, move both fader sliders to level 0 before
you press [Go], then move the sliders in your own timing.
pressing [Go] again plays the next cue in the cue list.
Clear a cue Press a fader's
[Clear] key to remove
the current cue from
that fader. You may
need to press [Clear]
twice to remove an
effect cue from the
fader.
Hold a cue Press a fader's [Hold]
key to pause the
playback of a cue.
Press [Go] to resume
the fade.
Move back Press a fader's [Back] key to replay the cue that played just
previously in that fader. Press [Back] again to move backward in
order in that fader. Press [Go] to move forward in order in that
fader.
Rate control Press a fader pair's [Rate] key to take manual control of the cue's
fade rate with the trackpad. This command is especially useful for
effect cues.
A B C
Clear
10
Rate
7
6
5
Back
4
3
2
1
0
Go Hold Go
Express v3.1 Quick Guide
D
Clear
10
9
8
Rate
7
6
5
Back
4
3
2
1
0
Hold