Disk Operations - ETC Express 24/48 Quick Manual

Lighting control console

Hide thumbs Also See for Express 24/48:

Table of Contents

Disk Operations

When you write to a diskette, both the show programming and the console's configuration

are stored to the diskette. However, you may read show and configuration information

separately from a showfile stored on diskette. Reading these two components separately

allows you to conveniently keep system configuration preferences the same, such as

default settings and hardware setup, even when you run different shows.

Insert a 1.44 MB high density diskette into the console's disk drive, then proceed as follows

to write to or read from the diskette.

Write to diskette:

Step 1:

Step 2:

Read only the show information:

Step 1:

Step 2:

Read only the configuration information:

Step 1:

Step 2:

To format the diskette:

Step 1:

Step 2:

Read all data from diskette:

Step 1:

Disk Operations