Rj45 Ports; Sfp Module - Cisco IR1101 Hardware Installation Manual

RJ45 Ports

The IR1101 supports one ISOLATED RS232 port which conforms to EIA-561 standard. The RS232 port is a DTE and its
pin out is shown in
The RJ45 pinouts are shown in
Figure 7 S0 Characteristics
Figure 8 S0 Details
Pin Number Description
1 DCE Ready, Ring Indicator
2 Received Line Signal Detector
3 DTE Ready
4 Signal Ground
5 Received Data
6 Transmitted Data
7 Clear To Send
8 Request To Send

SFP Module

Warning: Class 1 laser product. Statement 1008
The IR1101 Ethernet SFP module provides connections to other devices. These field-replaceable transceiver modules
provide the uplink interfaces. Local connectors (LCs) provide the fiber-optic connection. RJ-45 connectors allow copper
connections. You can use any combination of the supported SFP modules listed in the table that follows.
Note: The IR1101 is designed to operate in the Industrial temperature range (-40C to +85C internal component
temperature range) and therefore cannot support commercial rated SFPs.
Figure 8.
Figure 7
Abbreviation DTE
DSR/RI <—
DCD <—
DTR —>
COM
RxD <—
TxD —>
CTS <—
RTS —>
22