Power Supply; Modem Technology Supported - Cisco IR1101 Hardware Installation Manual

Table 5

Modem Technology Supported

Modem Used
WP7601-G
WP7603-G
WP7607-G
Table 6 GNSS Technology Supported
Technology
GNSS

Power Supply

The Cisco IR1101 comes with an external DC power connector. The 4-pin power entry connector (receptacle) is
mounted to the unit. The 4-pin power entry mating connector (plug) is attached to the receptacle. It is removed during
installation and used to connect to the DC power source, then reattached to provide power to the unit.
Note: The Cisco part number for the connector is 29-6115-01.
Refer to Figure 6 for the location and values of the power connector.
Figure 6 Power Connector Pin-Outs
Pin Number
1
2
3
4
Technology Supported
LTE CAT4: B4, B13
LTE CAT4:B2,B4,B5,B12
HSPA+,UMTS: B2,B4,B5
LTE CAT4: B3, B5, B8, B20, B28
HSPA+: B1, B5, B8
EDGE: 900/1800
RF Band
GPS
GLONASS
Galileo
BeiDou
Name
DC In +
DC In -
ALM REF
ALM IN
Receive (Rx) Band MHz
1575.42 +/- 1.023
1597.52 - 1605.92
1575.42 +/- 2.046
1561.098 +/- 2.046
Description
DC Power Positive Input
DC Power Return
Alarm Common
Alarm Input
21