Table of Contents
Advertisement
ACCESSORIES
10REMOTE
SINGLE LED
TRAFFIC LIGHT
Upon completion of the installation or service work, at a minimum, perform a safety inspection
for the type of Door/Gate per the manufacturer recommendations and/or per ANSI/DASMA guidelines
for best industry practices. Some examples but not limited to are ANSI/DASMA 102, ANSI/DASMA
107, UL 325. Make certain all appropriate industry warning labels are applied. It is the responsibility
of the installer/service personell to be familiar with national and local codes, standards, and regulatory
requirements. BEA Inc. recommends for installers and service personnel to be factory trained for the
type of door/gate system prior to performing installation or service.
BEA hereby declares that the IS40 / IS40 XL is in conformity with the basic requirements
and the other relevant provisions of the directive 2004/108/EC.
Angleur, April 2011
The complete declaration of conformity is available on our website: www.bea-industrial.be
Only for EC countries: According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment (WEEE)
For more information, please visit www.devancocanada.com
Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 | General Tech Questions: Tech_Services@beainc.com | Tech Docs: www.beasensors.com
75.5695.07 IS40 IS40XL 20170313
10SPOTFINDER
DUAL LED
TRAFFFIC LIGHT
1024VAC
Jean-Pierre Valkenberg, authorized representative
or call toll free at 855-931-3334
10INDBRACKET
10MINIDBRACKET
COLUMN LIGHT
10BR3
MODULAR
COLUMN LIGHT
Page 9 of 9
Advertisement
Table of Contents
