Panasonic Lumix DC-LX100M2 Basic Owner's Manual page 75

The brightness or the hue of the recorded picture is different from the
actual scene.
• When recording under fluorescent or LED lighting fixture, etc., increasing the shutter
speed may introduce slight changes to brightness and color. These are a result of the
characteristics of the light source and do not indicate a malfunction.
• When recording subjects in extremely bright locations or recording under fluorescent
lighting, LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen
brightness may change or horizontal striping may appear on the screen.
Recording motion pictures is not possible.
• You may not be able to record for a short while after turning this unit on when using a
large capacity card.
Sometimes focus adjustment with Auto Focus mode is difficult while
recording 4K motion pictures.
• This may occur when taking a picture by reducing the Auto Focus speed in order to
adjust the focus at high precision. This is not a malfunction.
The flash is not activated.
• The flash becomes unavailable in the following case.
> Flash set to [Œ] (Forced Flash Off). (P47)
• When the electronic shutter is used, the flash is not activated.
• When [Silent Mode] is set to [ON], the flash is not activated.
The Monitor turns off although the camera is turned on.
• When an object or your hand is positioned near the eye sensor, the Monitor display may
switch to the Viewfinder display.
Others
(ENG) DVQX1572
75