Panasonic Lumix DC-LX100M2 Basic Owner's Manual page 20

Preparation/Basic
(Charging from the power outlet)
Connect the AC adaptor (supplied) and this camera with the USB connection
cable (supplied), and insert the AC adaptor (supplied) into the power outlet.
(Charging from a computer)
Connect the computer and this camera with the USB connection cable
(supplied).
∫ About the charging lamp
Lit red:
Off:
• When the charging lamp flashes
– This occurs when charging is performed in an extremely hot or cold location.
Reconnect the USB connection cable (supplied) in a location where the ambient
temperature (and the temperature of battery) is in a 10 oC to 30 oC (50 oF to 86 oF)
range, and try charging again.
– If your PC is not capable of supplying sufficient power, charging is not possible.
• The battery becomes warm after using it and during and after charging. The
camera also becomes warm during use. This is not a malfunction.
∫ Charging time
When using the AC adaptor (supplied)
• The indicated charging time is for when the battery has been discharged
completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has
not been used for a long time may be longer than normal.
• When power is supplied from a computer, the power supply capacity of the computer
determines the charging time.
20
DVQX1572 (ENG)
Charging.
Charging has completed.
(When charging is complete, disconnect the camera from
the power outlet or computer.)
Approx. 190 min