Panasonic Lumix DC-LX100M2 Basic Owner's Manual page 39

[4K Pre-Burst]
4
Press the shutter button to perform recording.
• The camera will perform burst recording of a 4K photo and saves it as a 4K
burst file with a [Rec Format] setting of [MP4].
• When [Auto Review] is enabled, the picture selection screen will be displayed
automatically. To continue recording, press the shutter button halfway to display
the recording screen.
• For information on how to select and save pictures from recorded 4K burst files,
refer to P40.
∫ Preventing camera shake when you are recording pictures
When you perform [Light Composition] or [Sequence Composition], we
recommend using a tripod and taking pictures remotely by connecting the camera
to a smartphone to prevent camera shake. (P65)
∫ Canceling 4K Photo
2
In step , select [
¥
If the surrounding temperature is high or 4K photos are recorded continuously, [
may be displayed and recording may be stopped halfway through. Wait until the
camera cools down.
¥ When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera
temperature rises. (To protect itself, the camera may switch to [
Select [ ] ([4K Pre-Burst]) only when recording.
¥ Recording stops when the continuous recording time exceeds 15 minutes.
When using an SDHC memory card, you can continue the recording of a 4K photo
without interruption even if the file size exceeds 4 GB, but its burst file will be divided
into smaller files for recording and playback.
With an SDXC memory card, you can save a burst file size exceeding 4 GB as a single
file.
¥ The angle of view becomes narrower.
For recording as needed whenever a photo opportunity
arises
Burst recording is performed
for approximately 1 second
before and after the moment
that the shutter button is
pressed.
F Approximately 1 second
G Recording is performed
] or [ ].
Recording



] ([4K Burst]).)
(ENG) DVQX1572
]
39