Panasonic Lumix DC-LX100M2 Basic Owner's Manual page 55

[Light Composition]
Select multiple frames from 4K burst files that you wish to combine. Parts of the
image that are brighter than the preceding frame will be superimposed on the
preceding frame to combine the frames into one picture.
> [Playback] > [Light Composition]
MENU
1
Press 2/1 to select the 4K photo burst files and press [MENU/SET].
2
Choose the combining method, and then press [MENU/SET].
[Composite Merging] setting
Select the frames you want to combine to superimpose brighter parts.
1 Drag the slide bar or use
the frames to combine.
2 Press [MENU/SET].
• The selected frames are remembered, and the
display goes to the preview screen.
• Press 3/4 to select items and press [MENU/
SET] to perform the following operations.
– [Next]:
Lets you select more frames for combining.
– [Reselect]:
Discards the frame selected immediately before and lets you select a different
image.
3 Repeat steps
• You can select up to 40 frames.
4 Press 4
[Range Merging] setting
Select the first and last frames to superimpose the brighter parts of the frames
between them.
1 Select the frame of the first picture, and press [MENU/SET].
• The selection method is the same as in step 1 of [Composite Merging]
setting.
2 Select the frame of the last picture, and press [MENU/SET].
3
Select [Yes] at the confirmation screen, and then press [MENU/SET].
• Pictures are saved in JPEG format. Recording information (Exif information) of the
first frame such as shutter speed, aperture, and ISO sensitivity are also
registered.
3 /
and to select more frames to combine.
1 2
to select [Save], and then press [MENU/SET].
4 / 2 / 1 to select
(ENG) DVQX1572
Menu
55