Panasonic Lumix DC-LX100M2 Basic Owner's Manual page 19

Charging the Battery
The battery that can be used with this unit is DMW-BLG10PP.
Charge the battery in areas with an ambient temperature, between 10 oC and
30 oC (50 oF and 86 oF) (same as the battery temperature), is recommended.
Insert the battery into this unit. (P18)
Check that the camera on/off switch is set to [OFF].
A Connect the USB connection cable
(supplied) to the [USB/CHARGE]
socket.
• Place the camera in an upright
position, and find the terminal at the
bottom.
B Charging lamp
C AC adaptor (supplied)
D To power outlet
E PC (Turned on)
F USB connection cable (supplied)
• Do not use any other USB connection cables except the supplied one.
• Do not use any other AC adaptors except the supplied one.
• The AC adaptor (supplied) and USB connection cable (supplied) are for this camera
only. Do not use them with other devices.



• Check the direction of the terminals and
plug in/out straight holding onto the plug.
(It may result in malfunction by the
deforming of the terminal if it is plugged in
obliquely or in wrong direction.)
Do not connect devices to incorrect
terminals. Doing so may cause
malfunction.
(ENG) DVQX1572
Preparation/Basic

19