Maintenance; Battery Replacement; Replacing Test Leads; Attachments - Mastech MS2225A Operation Manual

5 Maintenance

5.1 Battery replacement

Before opening the battery cover of meter, take the
probe away from the measuring circuits to avoid
electric shock.
1) If the meter displays the symbol "
shall be replaced.
2) Unscrew the fastening screw of the meter battery cover
and remove it.
3) Replace the old battery.
4) Install the battery cover in the original position.
Note:
Do not install the battery in the incorrect direction.
5.2

Replacing Test Leads

Replace test leads if leads become damaged or worn.
Use meet EN 61010-031 standard, rated CA T III 1000V,
MAX 10A or better test leads.
To avoid electric shock,make sure the probes are
disconnected from the measured circuit before
removingthe rear cover.Make sure the rear cover is
tightly screwed before using the instrument.
WARNING
", the battery
WARNING
Warning
58

6 Attachments

1)
Probe
2) Operation instruction
3) Battery
Grade: 1000V 10A A pair
1 copy
6F22 9VOLTS
R-00-05-2313