Rdm - Robe Robin CycBar UV User Manual

7. RDM

This fixture is ready for RDM operation.RDM (Remote Device Management) is a bi-directional communications
protocol for use in DMX512 control systems, it is the new open standard for DMX512 device configuration and
status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without adversely affecting
existing non-RDM equipment. By using a special „Start Code," and by complying with the timing specifications for
DMX512, the RDM protocol allows a console or dedicated RDM controller to send commands to and receive
messages from specific moving lights.
RDM allows explicit commands to be sent to a device and responses to be received from it.
The list of commands for the Robin CycBar UV is the following.
Parameter ID
DISC_UNIQUE_BRANCH
DISC_MUTE
DISC_UN_MUTE
DEVICE_INFO
SUPPORTED_PARAMETERS
SOFTWARE_VERSION_LABEL
DMX_START_ADDRESS
IDENTIFY_DEVICE
DEVICE_MODEL_DESCRIPTION
MANUFACTURER_LABEL
DEVICE_LABEL
SENSOR_DEFINITION
SENSOR_VALUE
DISPLAY_LEVEL
DEVICE_RESET
DMX_PERSONALITY
DMX_PERSONALITY_DESCRIPTION
STATUS_MESSAGES
STATUS_ID_DESCRIPTION
DEVICE_HOURS
Please, see the Robe Universal Interface user manual for detail description of RDM operation.
Robin CycBar UV
Discovery command SET command
*
*
*
*
*
*
*
*
*
18
GET command
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*