Table of Contents
Advertisement
5. MEASURING PROCEDURE
5-1 Symbols & units of display
Symbols
Units
AUTO
Appears when selecting " Automatic range " mode.
Appears when selecting " Manual range " mode.
MANU
DC
Appears when selecting DC mode.
( DC voltage or DC current )
AC
Appears when selecting AC mode.
( AC voltage or AC current )
HOLD
Appears when the " Data hold " function is operated.
Appears when the " Relative " function is operated.
REL
Max
Appears when " Max and Min. value record "
Min
function is operated.
Battery voltage is already under the low condition.
Appears when the " Continuity beeper " is operated.
mV, V
Units for" voltage " measurements.
,K ,M
Units for " resistance" measurements.
uA,mA,A
Units for " Current " measurement.
Units for " Inductance " measurement.
uH,mH,H
Units for " Capacitance " measurement.
pF,nF,uF
Hz,KHz,MHz Units for " Frequency " measurement.
Appears when the " Diode " function is operated.
–
Appears when measuring a DCV or DCA value
is negative.
Units for " Temperature " measurement.
Over range indicator
– – – –
AdP
Notice must be inserted 9V ADAPTER
Descriptions
8
Hide quick links:
Advertisement
Table of Contents
