Manual Datalogger - Lutron Electronics DM-9962SD Operation Manual

Remark :
How to set the sampling time, refer to Chapter 8-2 ,
*
page 24 .
How to set the beeper sound is enable, refer to
*
Chapter 8- 4, page 25 .
b. Pause the datalogger
During execute the Datalogger function, if press the
" LOG Button " ( 3-8, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the " LOGGER " symbol will stop flashing.
Remark :
If press the " LOG Button " ( 3-8, Fig. 1 ) once again
will execute the Datalogger again, the " LOGGER "
symbol will flashing.
c. Finish the Datalogger
During execute the Datalogger function, press the
" LOG Button ( 3-8, Fig. 1 ) > 1.5 seconds continuously
again will finish the Datalogger function, the " LOGGER "
text will be disappeared and finish the Datalogger function.
6-3 Manual Datalogger ( Set sampling time = 0 seconds )
a. Set sampling time is to 0 seconds
Press the " LOG Button ( 3-8, Fig. 1 ) > 1.5 seconds, the LCD
will show the indicator " LOGGER " and "
then press the " LOG Button " ( 3-8, Fig. 1 ) once , the
" " and " Position no. " symbol will flashing once
and Beeper will sound once, at the same time the measuring
data along the time information will be saved into the memory
circuit .
19
" symbol