First Aid For Electric Shock; Grounded Tools: Tools With Three Prong Plugs - Chicago Electric 92280 Assembly And Operating Instructions Manual

10,000 watt (11,000 peak) generator with 18 hp robin engine

Hide thumbs

Table Of Contents

Table of Contents

11.

only use 3-prong (125 vaC) or 4-prong (240 vaC), grounded extension cords.

Warning: The warnings, cautions, and instructions discussed in this instruction manual

cannot cover all possible conditions and situations that may occur. It must be under-

stood by the operator that common sense and caution are factors which cannot be

built into this product, but must be supplied by the operator.

do not touch the victim's skin with bare hands until the source of the electricity has

been turned off.

Turn the generator off.

Pull the plug or hot cable away from the victim using an insulated material.

stand on dry insulating material and pull the victim clear of the conductor, preferably

using insulated material such as dry wood or an insulated hook.

once the victim is free of the electric current, check for breathing. if not breathing,

perform CPr and keep the victim warm. Have someone call the paramedics.

Warning: This generator must be grounded to earth ground before using.

Improperly connecting the grounding wire (or not using one) can result in the

risk of electric shock. Check with a qualified electrician if you are in doubt

as to whether the generator is properly grounded. Do not modify tool power

cords or extension cords that will be connected to the generator. Do not

remove their grounding prong. Do not connect to the generator, or use any

tool when the line cord or plug is damaged. If the plug will not fit the outlet,

have a proper plug installed by a qualified electrician.

Grounded Tools: Tools with Three Prong Plugs

Tools marked with "Grounding required" have a three wire cord and three prong

grounding plug. The plug must be connected to a properly grounded outlet. if the tool

skU 92280