DRAFT: BROCADE CONFIDENTIAL
A
Regulatory compliance
TABLE 10
PIN
6
7
8
Regulatory compliance
This section describes the regulatory compliance requirements for the Brocade 6520. It contains:
•
"FCC warning (US only),"
•
"KCC statement (Republic of Korea)"
•
"VCCI statement Japan"
•
"Power cords (Japan Denan)"
•
"China"
•
"BSMI statement (Taiwan)"
•
"CE statement"
•
"Canadian requirements"
•
"German statement"
•
"Laser compliance"
•
"RTC battery"
•
"Electrical safety"
FCC warning (US only)
This equipment has been tested and complies with the limits for a Class A computing device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual, might cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at the user's own
expense.
KCC statement (Republic of Korea)
A
Class A device (Broadcasting Communication Device for Office Use): This device obtained EMC
registration for office use (Class A), and may be used in places other than home. Sellers and/or
users need to take note of this.
38
Serial cable pinouts
Signal
Description
UART1_RXD
Receive data
Not supported
NA
Not supported
NA
next
on page 39
on page 39
on page 39
on page 39
on page 40
on page 40
on page 40
on page 40
on page 41
on page 41
(
):
on page 38
(A )
,
Brocade 6520 Hardware Reference Manual
.
53-1002705-01