FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SEVERE PERSONAL INJURY.
7. GUARD AGAINST ELECTRIC SHOCK
8. CONSIDER WORK AREA ENVIRONMENT
! ! ! !
Prevent body contact with grounded surfaces, such as pipes, radiators, ranges,
refrigerator enclosures.
! ! ! !
When tool and charger are used outdoors, use only extension cords intended for
outdoors and so marked.
! ! ! !
Wear protective gloves and non-skid footwear when working outdoors.
! ! ! !
Do not expose power tools directly to rain.
! ! ! !
Never operate tool in presence of gases or flammable liquids.
9. Never allow visitors to contact tool or extension cords. All visitors should be kept away from
work area.
10. DO NOT ABUSE TOOL
! ! ! !
Keep handle dry, clean and free from oil and grease.
! ! ! !
Always keep cord from heat, oil and sharp edges.
! ! ! !
Always store idle tool in dry, high or locked-up place.
! ! ! !
Always remove battery from tool when not in use or before servicing.
! ! ! !
To avoid unintentional starting, never carry plugged-in tool with finger on switch.
11. MAINTAIN TOOL WITH CARE
Check Damaged Parts. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition that may affect its operation. A guard
or other part that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated elsewhere in this instruction manual. Have
damaged switches replaced by authorized service center. Do not use tool if switch does not
turn it on and off.
! ! ! !
When servicing double insulated tool, use identical replacement parts.
! ! ! !
Keep tool clean for better and safer performance.
! ! ! !
Inspect tool, battery and charger periodically and, if damaged, have repaired by
authorized service facility.
12. USE FOR THE INTENDED PURPOSE
This tool is designed for bundling round packages with Signode brand steel strapping.
POSSIBLE MISUSES
The use of any other strapping material may void this tool's warranty.
READ THESE INSTRUCTIONS CAREFULLY.
3
Need help?
Do you have a question about the GRIPPACK 114 and is the answer not in the manual?