Advertisement
ShareLink Pro 1000 • Setup Guide (Continued)
Front Panel Features and Cabling
CONFIG
HDMI
WINDOW
A A
B B
ShareLink Pro 1000 Front Panel
Figure 3.
Power LED indicator — Lights green when the unit is powered on.
A
Config USB port (future use)
B
HDMI input selection buttons — Use these buttons to select between HDMI window mode and pass-through
C
mode. These modes determine how the HDMI input is presented on the output (see below for details).
HDMI Window button – Activates HDMI window mode, which displays the HDMI input source in addition to
•
or alongside any content currently being shared by client devices.
NOTE: Maximum output resolution for this mode is 4K @ 30Hz.
HDMI Pass-Through button – Activates HDMI pass-through mode, which routes the HDMI input signal
•
directly to the HDMI output unaltered. In this mode, neither the status bar nor decoder input streams are
shown on the output.
NOTE: Maximum output resolution for this mode is 4K @ 60Hz.
Input LED indicators —
D
HDMI Signal LED – Lights green when an HDMI signal is detected.
•
Decoder Signal LED – Lights green when one stream is detected. Flashes green when more than one
•
stream is detected at the same time.
HDCP LED – Lights green when the source signal is encrypted. Turns off when input signal is not encrypted
•
or when HDCP authorization is disabled.
Output LED indicators — These LEDs light green when the source signals are present and active on the
E
output.
HD Win – Lights green when HDMI source is active on the output in HDMI window mode. Lights amber if
•
HDMI pass-through mode is activated after originally being in window mode.
Decoder – Lights green when at least one stream is active on the output. Lights amber if HDMI
•
pass-through mode is activated after at least one stream was active on the output.
Standby Screen – Lights green when the standby screen is active on the output. Lights amber if HDMI
•
pass-through mode is activated while the ShareLink Pro output displays the standby screen.
NOTE: The standby screen images are displayed only when HDMI and decoder sources are not active.
HD Pass – Lights green when the HDMI source is active on the output in pass-through mode.
•
USB ports (future use)
F
2
INPUT
HDMI
DECODER
SIGNAL
HDMI
HDCP
PASS-THROUGH
C C
D D
OUTPUT
USB
1
HD WIN
HD PASS
STANDBY
DECODER
SCREEN
ShareLink Pro 1000
E E
F F
2
Advertisement
