Panel Mounting - Aaeon AOP-9150 Manual

O p e r a t o r P a n e l

2.2 Panel mounting

The display panel can be mounted into the wall. You will need the
screws along with the mounting brackets, which be packed in the
accessory box. Follow the steps below:
Before you start to follow the instructions, please place the display
panel into the wall. See the following illustration on the left.
Step 1: Place the mounting brackets and plug the screw.
Step 2: Aim the mounting set at the hole on the monitor.
Step 3: Move the mounting set to the narrow gauge and fix it with
screws.
Step 4: You've completed the preliminary when the mounting set is
tightened. Next, repeat the steps and tighten all mounting set
around the monitor until the monitor is firmly mounting on the wall.
1
2
3
4
A O P - 9 1 5 0
Chapter 2 Hardware Installation
2-5