Advertisement
2.Turn on the Bluetooth controller and motor
Hold the ON/OFF button on the Bluetooth controller for three
seconds until the screen is illuminated. The motor will then turn
on automatically.
3.Bluetooth Connection
Once the Bluetooth controller is turned on, the indicator lights
will blink quickly for 60 seconds, which means the Bluetooth is
searching. When the Bluetooth connection is completed, the
indicator light will stay constant.
1.Searching for Bluetooth ：
Blinking fast 60s.
*1.The stable transmission distance of the controller is about 10 meters, and the
actual control distance is affected by environmental factors.
*2.The motor and the controller will disconnect when the signal is weak. Once the
signal returns to normal, the motor and controller will automatically resume
connecting.
4.Calibration
(1) Press the ON/OFF button of the Bluetooth controller
once, then press it again and hold, until the motor rotates
(2) Hold the button on the bottom of the motor for three
seconds, until the motor rotates.
(1)Press the button once,
then press it again for
three seconds.
.
2.Successful Connection:
Constant light
(2)Hold down the
button for three
seconds
www.pdmovie.co.uk
3
Advertisement
