Advertisement
(3). Manual calibration:
1.When the motor gear and the lens gear are completely
interlocked, turn the lens to the starting point and stop for 0.5
seconds.
2.Then turn the lens to the end and stop for 0.5 seconds.
3.Finally turn the lens back slightly. The lens is now manually
calibrated. (We would recommend manually calibrating
DSLR lenses, or lenses without hard stops)
Table 1:Bluetooth Controller button functions
Button Input
Table 2: Indicator Light colour
Residual Charge
100%-75%
74%-50%
49%-25%
24%-0%
www.pdmovie.co.uk
(1)turn the lens to the
start point and stop for
0.5 seconds.
(2) Turn the lens to the end
point, stop for 0.5 seconds and
then turn the lens back slightly.
Function
ON/OFF
Setting AB Point
Calibration lens stroke
Turn on the Bluetooth
Switch Motor Rotation
Indicator Light Colour
WHITE
GREEN
YELLOW
RED
4
Advertisement
