Download Print this page

Danfoss AMV 130 Operating Manual page 4

Actuators for three point control

Advertisement

AMV 130(H), AMV 140(H)
ENGLISH
Safety Notes
To avoid injury of persons and
damages to the device, it is absolutely
necessary to read and observe these
instructions carefully.
Necessary assembly, start-up, and maintenance
work must be performed by qualified and
authorized personnel only.
Please comply with the instructions of the
system manufacturer or system operator.
Do not remove the cover before the
power supply is fully switched off.
Disposal instruction
This product should be dismantled
and its components sorted, if possible,
in various groups before recycling or
disposal.
Always follow the local disposal regulations.
Part Name
Lead (Pb)
部件名称
铅 (Pb)
Connecting nut
X
连接螺母
X
O: Indicates that this hazardous substance contained in all of the homogeneous material for this part is below the limit requirement in GB/T 26572;
O: 表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572规定的限量要求以下。
X: Indicates that this hazardous substance contained in at least one of the homogeneous material for this part is above the limit requirementw in GB/T 26572;
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。
4 | © Danfoss | 2017.07
Mounting
In case of ship applications (on water) actuator
should be mounted with the valve stem in
either 30° above horizontal position or pointing
upwards.
In case of building applications actuator should
be mounted with the valve stem in either
horizontal position or pointing upwards.The
actuator is fixed to the valve body by means
of a ribbed nut which requires no tools for
mounting. The ribbed nut should be tightened
by hand.
Wiring
24 V
230 V
Do not touch anything on the PCB!
Lethal voltage!
Installation
1. Check the valve neck. The actuator should
be in steam up position (factory setting).
Ensure that the actuator is mounted securely
on the valve body
2. Wire the actuator according to the wiring
diagram
3. The direction of stem movement can be
observed on the position indicator ①
Mercury (Hg)
Hexavalent Chromium (Cr(VI))
Cadmium (Cd)
汞 (Hg)
镉 (Cd)
O
O
O
O
Grey
Stem down
Black
Common
Red
Stem up
Black
Stem down
Blue
Common
Brown
Stem up
Hazardous Substances Table/有害物质含量表
Polybrominated biphenyls (PBB)
六价铬 (Cr(VI))
O
O
Manual override
(for service purposes only)
Do not manually operate the drive if
power is connected!
AMV 130, AMV 140 ❹
① Remove cover
② Insert the Allen key 6 into the spindle
③ Press and hold the button (on the bottom
side of the actuator) during manual override
④ Pull out the tool
⑤ Replace cover
Remark: A 'click' sound after energising the
actuator means that the gear wheel has
jumped into normal position.
AMV 130H, AMV 140H ❺
Press and hold the button ① (on the bottom
side of the actuator) during manual override.
Remark: A 'click' sound after energising the
actuator means that the gear wheel has
jumped into normal position.
Dimensions
Polybrominated diphenyl ethers (PBDE)
多溴联苯 (PBB)
多溴二苯醚 (PBDE)
O
O
O
O
VI.KU.L5.9O

Advertisement

loading

This manual is also suitable for:

Amv 140Amv 130hAmv 140h