Page 3
❸ AFQM ① ② ③ VFGS 2 AFQM VFU 2 ① ② VFU 2 VFG 2 (21), (25) ① ② VFG 2 (21), (25) ❹ ❺ DN 150-250 ① ������������ ② DN 150-250 AFQM, AFQM 6 Danfoss Heating VI.AA.T2.02 DH-SMT/SI...
Page 4
Limit contacts for position “OPEN” Open Limit contacts for position “CLOSE” Close Open Stop Aut o Safety pressure limiter Stop Br . Close ① Safety temperature limiter Br . Power supply L/N/PE ~ 230 V / 50 Hz DH-SMT/SI VI.AA.T2.02 Danfoss Heating...
Page 5
⑤ AUTO 0 - 2 V STOP ⑨ ① CLOSE ⑦ ④ ② ⑪ OPEN OPEN ⑮ STOP STOP AUTO AUTO STOP STOP OPEN CLOSE CLOSE STOP AUTO ⑬ STOP CLOSE ⑩ ⑰ ⑯ ⑭ ⑫ Danfoss Heating VI.AA.T2.02 DH-SMT/SI...
Page 6
AUTO STOP STOP STOP AUTO CLOSE CLOSE STOP CLOSE ⑦ ⑥ VFG.., AFQ VFU 2 ⓯ ④ OPEN STOP AUTO ③ STOP ② CLOSE ① VFG.., AFQ VFU 2 ⑥ ⑤ ⑦ VFG.., AFQ VFU 2 DH-SMT/SI VI.AA.T2.02 Danfoss Heating...
The electrical actuator AMV(-H) 6.. can be 4. Place actuator on the valve and align. • the actuator is mounted on the valve mounted on the following valves, see ❷. 5. Tighten union nut ③ torque 100 Nm • the electrical connection is completed. Danfoss Heating VI.AA.T2.02 DH-SMT/SI...
7. Afterwards, turn pot ⑦ to the left ⑨ Mechanical Manual Adjustments ⓯ until the relay switch is audible, then Procedure: (only for the actuators AMV 610, AMV-H 613) stop immediately. 1. Find the stroke in the table below: In case of a power supply failure or a...