Page 1
Falcon Multi-Purpose Stabilizer Rig ( P-FLCN ) I N S T R U C T I O N M A N U A L All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the publisher.
Page 2
Getting a multi-function rig that replaces the need for multiple products is always beneficial for every video maker. We launched our new Proaim Falcon Multi-Purpose Stabilizer Rig that performs the functionality of multiple products – it becomes a Shoulder Rig, Selfie Stick, Handheld Stabilizer & Video Grip within seconds.
Page 3
PROAIM Falcon Multi-Purpose Stabilizer Rig To Mount the camera onto the camera mounting plate, use the 1/4 “-20 screw on the mounting plate. NOTE: Check every screws on the tooth joint, to make sure these screws are tightened properly.
Page 4
PROAIM Falcon Multi-Purpose Stabilizer Rig Then remove the side knob and insert the Go pro camera and reinsert the knob to tighten properly. YOUR PROAIM FALCON MULTI-PURPOSE STABILIZER RIG ALL DRESSED UP AND GOOD TO GO As a selfie pole...
Page 5
PROAIM Falcon Multi-Purpose Stabilizer Rig WARRANTY We offer a one year warranty for our products from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us.
Need help?
Do you have a question about the Falcon P-FLCN and is the answer not in the manual?
Questions and answers