Assa Abloy Norton LEO 5700 Series Installation And Instruction Manual page 10

Notes:
1. Power input to Door Operator Unit is at
"T1" Power Input Terminal (not shown)
120VAC 60Hz.
2. Radio Frequency Feature can be
purchased as a separate kit.
ORANGE
BLACK
BROWN/WHITE
RED
Notes:
1. Power input to Door Operator Unit is at "T1" Power
Input Terminal (not shown) 120VAC 60Hz.
2. Unit's Relay Rating for strike interface: 30VDC @ 1A
or 125VAC @ .5A
NC
NO
JMP503
Jumper Settings
Place jumper to upper position
for normally closed operation
or to lower position for
normally open operation.
Page 10
Radio Frequency Function Option
Optional 1.1A 24V
Power Supply
L N
-V +V
(AC)
ADJ
120
VAC
RF
RECEIVER
WIRING FOR
BOARD
MOMENTARY
(PART OF
HOLD OPEN
OPERATOR
FUNCTION
UNIT)
Fail Secure / Fail Safe Electric Strike Wiring
DC or AC
1 1
2
2
3
3
4 4
+
Operation:
€ Door is normally closed.
€ Activating wireless switch or hand held
wireless transmitter will open the door.
€ Door will close after hold open delay
elapses.
120VAC
Supplied by
Output
Others
- +
+
-
Optional Door 2
Door 1
Wall Switch, Card
Reader, Key Switch,
etc.
Normally Open Momentary
dry contacts
Operation:
€ Door is normally closed and latched.
€ Activating switch will unlock the electric strike and
the door will automatically open. Door will close
after hold open time delay has elapsed.
€ For Fail Secure Strike - The door will remain
locked during power failure.
!
For Fail Safe Strike - The door will remain
unlocked during power failure.
80-9357-0002-020 (01-12)