Replacing The Light Bulb - V-ZUG DFSG5 Operating Instructions Manual

5 Care and maintenance
▸ Ensure that all centring pins are sitting properly in the retaining slots. Only
then will the grip flap 2 latch completely in place.
– The grease filter is correctly inserted if it lies flush with the housing.
5.3

Replacing the light bulb

Remove the screw fuse for the appliance or switch off the circuit
breaker.
Halogen and LED light bulbs get hot during operation! Allow them to
cool down first.
▸ Pull the glass deflector plate completely out.
▸ Remove the grease filter.
▸ Unscrew the defective light bulb from its fixture and replace it with a new
one of the same type. See designation on the light bulb housing or on the
identification plate: either a halogen light bulb (230 V / 28 W) or a LED light
bulb (230 V / 3 W) may be used as desired.
▸ Put back the grease filter.
▸ Push in the glass deflector plate and put back the screw fuse or switch on
the circuit breaker again.
18