Description / Panels - Eaton MBP11K208 Installation And User Manual

2. Presentation

2.2 Description / Panels

The HotSwap MBP has a manual Bypass rotary switch with two positions:
p UPS
p Bypass
2 lights indicate the Hotswap MBP power status:
p "UPS supply" green light: when active, the UPS output is available, the Bypass switch can be safely
turned to UPS position
p "Bypass mode" red light: when active, indicates that the Hotswap MBP is on "Bypass mode" (Bypass
switch turned to Bypass position)
Normal AC source switch
Allow to safely switch off the AC source of the UPS, for UPS maintenance / replacing
MBP status detection:
A signal cable, with RJ11 connector to plug to the UPS, allows the communication to the UPS to manage
the MBP status, and the indication on UPS display panel of both following status:
p MBP connection to UPS
p Bypass switch position
Check the UPS user manual to check the compatibility of this feature, or contact Eaton reseller for more
information
MBP6K208
5
7 6 1
MBP11K208
6
7
Page 8
the load is supplied by the UPS
the load is supplied directly by the AC power source
4 3
2
1 4
8 5 9 2
3
(1) Input/Output terminal blocks
(2) Normal AC source switch
(3) Input/Output/MBP-Detection
connector to the UPS
(4) Manual Bypass switch
(5) (2) 30A outlets
(6) UPS supply green light
(7) "Bypass" mode red light
(1) Input/Output terminal blocks
(2) Input/Output terminal blocks for
connection to the UPS
(3) Normal AC source switch
(4) Signal cable for MBP detection to
the UPS
(5) Manual Bypass switch
(6) (3) 30A outlets
(7) 30A circuit breaker
(8) UPS supply green light
(9) "Bypass" mode red light
SK-90610-Y4_EN