Epcom EPIG5K User Manual page 31

NOTICE
The communication parameter is the most important parameter in the
inverters' communication and the communication between the inverter
and the external monitor device.
10. Select "communication set", press "ENTER", you can
set the communication address and the
11. Select "Protection set", press "ENTER" into the
protection setting interface ,you can set the on-grid
voltage and the protect frequency;
12. Select "Code set", press "ENTER "into the code
setting interface, you can set the password in order to
strengthen the safety of the system;
13. Select "return initial set", press "ENTER" into the
initializing interface ,it can initialize the language,
time, date, communication ,protect parameter and so
on. All the record and fault information will be cleared
and return to the parameter set interface ,so please
think carefully to use the function of returning to the
factory value;
14. Press "ENTER" to select the data ,use the
delete the value, after the set of the last value, press
"enter" to confirm;
15. When the value of the generation power on the LCD
is not the same with the outside metering device ,the
interface will change the generation value ; Notice
that when you select +,use
16. Generation power compensation=metering device
value-generation power value on the LCD;
- 29 -
baut rate;
to add or
can change the +/-;