Epcom EPIG5K User Manual page 28

8.2.2 HISTORY
4. It first shows the PV input parameters
5. Press , it displays the actual parameters of AC output
1. Enter the default main menu interface;
2．Press "ENTER"into the "control main menu;
3．Select "HISTORY";
4. Press "ENTER"into the "History" menu
5. Fault history including present fault information and
history fault information。
6. The exact fault as below: DC over voltage, AC low
voltage, frequency abnormal, island effect,
temperature abnormal, DSP abnormal,
communication abnormal and so on.。
7. Press to next page to see the information.
8. Press "ENTER",showing the interface to clear
history information .
- 26 -