Page 1
Radiance 230-WATT DAYLIGHT LED MONOLIGHT USER MANUAL...
Page 2
23,000 lux for a powerful, flicker-free 5600 K light source. Extremely quiet cooling fans make the Radiance a great a choice for film, broadcast, and video projects, as well as photo sessions. The Radiance runs on AC power or two V-mount batteries that will provide enough power for lengthy location shoots.
Page 3
· Clean the unit with only a soft, dry cloth. · Use only the correct, recommended voltage. · Images are for illustrative purposes only. · Handle the unit with care. Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Page 4
Light Fixture - Front COB LED array PRODUCT OVERVIEW Reflector Bowens mount release Locking button Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Page 5
Light Fixture - Back Tilt adjustment knob Yoke Locking knob 5/8 in. mount Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Page 6
Power Supply - Top Channel/ID adjustment buttons Channel/DMX ID Color temperature Brightness Color temperature up/down buttons (bicolor fixtures only) Brightness up/down buttons V-mount battery slots LCD screen Dimmer knob Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Page 7
DC power cable Brightness Channel/DMX ID Antenna port Brightness up/down Power socket buttons Power button Battery power and Power switch charging indicators I - DC power O - Off II - AC power Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Page 8
· Antenna 2. Make sure the mount is properly seated on the light stand, and turn · Reflector the locking knob until secure. · Carry case · User manual Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Page 9
Do not look directly into the light while it’s being switched on. Turn the power supply switch to the (=) position. The LCD screen will illuminate, and the Radiance will power on to the last settings. Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
(O) position, and scroll up or down. the fixture is not plugged into a wall outlet. To turn on the fixture, move the power switch to the DC (–) position. Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Menu button to accept your selection. Important DMX addresses range from 0 to 512. If the DMX ID is set to a value greater than 512, the DMX controller will not communicate with the Radiance. Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
After three seconds, the digit will stop remote from 100 to 165 feet (30 to 50 m), blinking, and the selection will be set. screw the antenna into the antenna port on the rear of the power adapter. Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Page 13
3. Refer to the DMX console’s user manual so a DMX console can remotely to set the DMX address on the controller. control the the light’s settings. Set the DMX ID on the Radiance by following the instructions in Setting Note the Channel and DMX ID above.
Dimming: Yes, 100% to 0% Yoke Type: U bracket yoke Display: LCD Tilt: 180° Housing Material: Metal Photometrics: 19,240 lx at 1 m 2,130 lx at 3 m 769 lx at 5 m Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Page 15
Certifications: CE, RoHS Remote Control Type: 2.4 GHz, DMX 512 Number of Channels: 999 Number of DMX Channel Modes: 512 Wireless Range : 100 ft. (30 m) 164 ft. (50 m) with antenna Radiance 230-Watt Daylight LED Monolight - USER MANUAL...
Page 16
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. Genaray’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at Genaray’s discretion, of...
Need help?
Do you have a question about the Radiance and is the answer not in the manual?
Questions and answers