Dynojet Power Commander V Installation Instructions Manual page 5

FIG.G
FIG.H
FIG.I
18-003 www.powercommander.com
10 Locate the stock Crank Pickup Coil Sensor on the right side of the motorcycle.
Unplug this connection (Fig. G).
This is a WHITE 2 pin connector near the bottom of the oil reservoir tank.
11 Plug the WHITE connectors from the PCV in-line of the crank sensor
connectors (Fig. H).
12 Attach the ground wire from the PCV to the stock ground location on the right
side of the frame (Fig. I).
This is located near the crank sensor connector.
KTM Adventurer PCV - 5