Sierra Wireless Overdrive User Manual page 22

2.
If the device LCD is blank, press and hold the power button
Turning Your Device Off
Press and hold the power button
Using the Power Button to Determine the Device State
The power button
Power button
Lit, flashing (approximately
every 4 seconds)
Lit, flashing (approximately
every 30 seconds)
14 Your Device
for 2 seconds.
on the device also indicates the device's status, as shown in the following table.
Description
The device is turned off, and may or
may not be charging.
Not lit
The device is turned on, but you have
turned off the LED.
The device is turned on, and the LED
is enabled.
The device is in standby (low power)
mode.
The following are off: LCD, Wi-Fi
radio, 3G/4G radios.
For more information, see "Standby
(Low Power) Mode" on page 46.
for two seconds.
Your action
To turn the device on, press and
hold the power button
seconds.
[OPTIONAL]: Turn on the LED. See
"Enabling and Disabling the LED"
on page 70.
No action required.
To exit standby mode:
Connect the device to the AC
charger or computer, through the
USB to Micro B cable.
— or —
Press the power button
for two
.