Security Tips; Finding The Mac Address - Sierra Wireless Overdrive User Manual

4.
If the Wi-Fi client network adapter is by Intel, click
Management and move the slider all the way to the right (to
— or —
If the Wi-Fi client network adapter is not by Intel, select a configuration with minimal power
savings (to maximize throughput).
Note:
The above settings are often controlled by 3
changed. If Wi-Fi performance improves for a while after performing the above steps, but then
declines, recheck the above settings.

Security Tips

●
Change the Wi-Fi network name (SSID) and Wi-Fi password on a regular basis. See "SSID (Wi-Fi
Network Name)" on page 83 and "Wi-Fi Password" on page 86.
●
Disable SSID Broadcast. See "Network Panel" on page 81.
●
Use the highest level of Wi-Fi security that your devices support. See "Wi-Fi Security" on page 85.
●
Change the login password. See "Changing the Administrator Password" on page 73.
●
Use MAC filtering to specify computers that are or aren't allowed to connect to the network. See
"MAC Filter Panel" on page 82.

Finding the MAC Address

You'll need to know the MAC address of a device, when performing any of the following:
●
Assigning an IP address based on a MAC address (when using DHCP). See "DHCP Static IP
Assignment List" on page 99.
●
Allowing or denying computers access to the network. See "Allowing or Denying Computers
Access to the Network" on page 87.
Tip:
You can display a list of connected devices, including the MAC address of each device: click
connected devices
settings > Wi-Fi > Network
The steps to finding the MAC address of a device vary, depending on your operating system.
Windows
1.
Open a command prompt window.
Click and
Start
Type cmd or command
2.
At the command prompt, type
3.
Write down the Physical Address for the entry that relates to the wireless network connection; it
appears as a series of numbers and letters — this is the MAC address of your wireless adapter.
122 Resources
Advanced settings > Wi-Fi > MAC Filter
, available from
.
.
Run
, and click OK .
ipconfig/all
and, in the
Advanced
Highest
rd
-party value-add applications and may be automatically
and press .
Enter
list, click
Property
). Click OK .
List of
Advanced
and
Power