Configuring 3G/4G; Viewing 3G Activation Information; 3G Panel - Sierra Wireless Overdrive User Manual

Section 5H

Configuring 3G/4G

Viewing 3G Activation Information (page 91)
3G Panel (page 91)
Resetting the 3G/4G Configuration to Default Settings (page 92)

Viewing 3G Activation Information

1.
Log in to the home page.
2.
Click Advanced settings
3.
Click
Device > About
The following fields are related to 3G activation:
● Activation Status
— Activated or not activated.
● Activation Date
— Date that the 3G modem was first activated.
● Network Operator
— The carrier that your device was activated for.

3G Panel

1.
Log in to the home page.
2.
Click
Advanced settings
3.
Click WAN > 3G .
From this window, you can view or update this information, or perform the following actions:
● Connection Status
: connected, not connected, or dormant.
Dormant means a connection is established, but no data is being transferred.
● Service Type
used for the data connection (1xRTT, EVDO, or EVDO Rev. A).
● Coverage Type
available, and RSSI and Ec/Io for each type.
RSSI reflects the signal strength of the network.
Ec/Io is a dimensionless ratio of the average power of a channel, typically the pilot channel, to
the total signal power.
● MDN
(Mobile Directory Number) — a 10-digit phone number.
● SID
(System ID) — The System ID identifies your home network area and is used in conjunction
with your phone number to determine if you are "home" or "roaming."
● MSID
(Mobile Station ID) — Also known as IMSI (International Mobile Station Identity) — an
identifier of a device on the 3G network.
● NAI
(Network Access Identifier) — User ID for accessing the 3G network.
( ).
.
( ).
Settings 91