Launch Telnet Window - AMX VPX-1401 User Manual

Launch Telnet Window

To launch Telnet Window,
Right click the Device Number in NetLinx Studio's Online Tree. Select "TELNET Window" – "Launch TELENT Window via NetLinx
1.
Studio" (or "Launch TELENT Window via User Defined Program").*
The Telnet window opens.
2. At the prompt (>), type the Telnet command and press Enter.
* If you select "Launch TELENT Window via User Defined Program", you may need to enable Telnet by completing the following:
(1) go to Start/Control Panel/Programs and Features;
(2) on the left, select "Turn Windows features on or off";
(3) select the check-boxes Telnet Client and Telnet Server, and click OK.
User Manual - VPX-1401 20