Completing The Measurement - Icare Home TA022 Patient Manual

Completing the measurement

9
Press Measure button to
measure pressure (probe will
contact eye during measurements).
Press and hold button to collect 6
measurements in a row,
or
Press button briefly (1 second) 6 times
to collect one measurement at a time.
10
When the measurement ends
successfully, you will hear a long
beep, the probe base light will power
off, and the Done light illuminates.
Discard probe by placing probe back in
its container and disposing it properly.
!
CAUTION: If an error occurs, press
Measure button briefly (1 second)
and continue measurement.
11
If your doctor instructed you to
measure both eyes, repeat steps
1 through 10 using your other eye.
12
After completing all measurements,
press and hold the
until you hear 3 short beeps.
i
NOTE: The tonometer will power off
automatically if unused for 3 minutes.
10
Power button
DONE
Steps
1-10
11