Advertisement
Activate manual switching
Briefly press both keys simultaneously
†
¾
Activate permanent switching
Simultaneously press both keys for 2 seconds
†
¾
Cancelling manual/permanent switching
Press both keys simultaneously
†
¾
Configure external input
For the channel, an EXTERNAL INPUT (see figure) can be set
with different functions.
3 submenus are selectable: Inactive, push button (function),
switch (function)
•
INACTIVE: The external input has no function
•
PUSH BUTTON: Manual (manual control), Timer (count-
down timer) and Staircase light time switch are
selectable
•
SWITCH: Permanent on, permanent off and only Astro are
selectable
L If a function is activated via an external push button or
switch, EXTERNAL is displayed
Press MENU, to select use u EXT INPUT and follow the on-
†
¾
screen instructions
MENU
OPTIONS
u
OPERATING
EXT INPUT
HOUR
NOT ACTIVE
u
SWITCH
u
TIMER
PERM ON
TIMER
ON
HOUR
MINUTE
SECOND
u
u
BUTTON
u
u
OVERRIDE
STAIRCASE
LIGHT
u
u
PERM OFF
NUR ASTRO
Operating hour counter
The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating
hours exceeds the value set in the Service menu, SERVICE will
appear in the display.
Example: Replace a lamp after 5,000 h.
Delete operating hours or set a higher value in Service (e.g.
†
¾
to 10,000 h)
Using the OBELISK top2 memory card
L The OBELISK top2 memory card is not included in the
scope of supply of the device, but can be ordered as an
accessory (no. 9070404).
All functions can also be set on the PC using the OBELISK
software and transferred to the device via the memory card.
Insert memory card in the time switch
†
¾
Read in/out saved switching times and device setups in
†
¾
the time switch or start Obelisk program
Remove OBELISK top2 memory card after copying etc.
†
¾
!
Avoid mechanical overload and contamination during
storage/transport
Copy OBELISK → Time switch
Copies all switching programs and settings from the time
switch to the memory card.Starting OBELISK program
Copy Time switch →OBELISK
u
Copies all switching programs and settings from the time
switch to the memory card.
Start OBELISK program
Takes on the switching times that are programmed on the
memory card.
As soon as the memory card is removed, the switching times
of the time switch are re-activated.
OBELISK
u
COPY
OBELISK -> TIME
SWITCH
TRANSCRIBE OK
u
COPY TIME
RUN OBELISK
SWITCH ->
OBELISK
OVERWRITE OK
u
CHECK OBELISK
5
Advertisement
