Menu item OPTIONS Contents Enter PIN code Basic safety instructions External input Display and keys Operating instructions OBELISK top2 memory card Connection/installation Technical data Overview of menu selection Service address/Hotline Initial start-up Reset Menu item PROGRAMM Program switching time Check/modify switching time Delete switching time Pulse time programming Cycle time programming...
Basic safety instructions WARNING Danger of death through electric shock or fire! Installation should only be carried out by a qualified electrician! • The device is designed for installation on DIN top hat rails (in accordance with EN 60715) •...
Screen and keys Operating instructions 230-240V~ µ 50-60Hz R10a -25T 16(4)A 250VAC 1. Read text lines Text represents query Date display Time display TR 608 top2 Channel status ON = On AM PM OFF = Off Weekdays from 1 to 7 2.
Connection/installation WARNING Warning, danger of death through electric shock! Must be installed by qualified electrician! Disconnect power source. Cover or shield any adjacent live components. 45° cable Ensure device cannot be switched on! Check power supply is disconnected. Plug-in terminal ...
Overview of menu selection MENU 19 05 11 PROGRAM TIME/DATE MANUAL OPTIONS 9:40 TIME PERM ON OPERATING HOURS CHECK DATE PERM OFF EXTERNAL INPUT* MODIFY SU-WI OVERRIDE LANGUAGE DELETE TIMER* WEEK DAY FORME FACTORY HOLIDAY DATE SETTINGS FORME TIME...
Initial start-up Set date, time and summer/ ENGLISH 19 05 11 SU-WI GB/IRL/P winter time rule RETAIN DELETE 9:40 SU-WI PROGRAM PROGRAM FIN/GR/TR FORME Press required key and display SU-WI CDN DATE follows on screen (see figure). 3 1 0 5 1 1 SU-WI USA YEAR...
PROGRAM Program switching time Example: Switch on sports hall lighting from Mon–Fri, 7:30 to 12:00 hrs Press MENU. PROGRAM is displayed. Confirm by pressing OK. NEW is displayed. Confirm by pressing OK. SWITCH is displayed. Confirm by pressing OK. Select ON (for switch-on times). ...
Page 9
MENU PROGRAM SWITCH PULSE CYCLE HOUR ON 7.30 MINUTE MONDAY TUESDAY WEDNESDAY COPY SAVE TUESDAY SAVE 84 memory locations are available (TR 609 top2 S).
Check/modify switching time Press MENU. PROGRAM is displayed. MENU Confirm by pressing OK. NEW is displayed. PROGRAM Use to select CHECK. Confirm by pressing OK. CHECK MODIFY DELETE Confirm SWITCH by pressing OK. The first of the entered switching times SWITCH is displayed.
Delete switching time Press MENU. MENU PROGRAM is displayed. PROGRAM Confirm by pressing OK. NEW is displayed. Press to select DELETE. DELETE Confirm by pressing OK. The display shows SWITCH SWITCH. MONDAY Confirm by pressing OK. MONDAY is displayed.
Pulse time programming (only with TR 609 top2 S) Example: Switch on pause signal on Monday 8:05 hrs for 5 sec Press MENU. PROGRAM is displayed. Confirm by pressing OK. NEW is displayed. Confirm by pressing OK. SWITCH is displayed. ...
Page 13
MENU PROGRAM SWITCH PULSE CYCLE HOUR MINUTE ON 8.05 SECOND PULSE LENGTH IN MINUTES PULSE LENGTH IN SECONDS Length 5 sec MONDAY TUESDAY WEDNESDAY COPY SAVE TUESDAY SAVE...
Cycle time programming (only with TR 609 top2 S) In addition to switch-on and switch-off times (switching time) and short time pulses (pulse) cycle times (cycle) can also be programmed. The pulse length (+ pulse pause) is limited to 17 hrs, 59 min, 59 sec •...
TIME/DATE In the menu TIME/DATE the TIME, DATE, SUMMER WINTER RULE, WEEKDAY etc. can be ente- red/changed in the submenus. Press MENU using select DATE/TIME and follow the indications on the display. MENU TIME/DATE ...
MANUAL In the MANUAL menu manual switch functions are applied. In the submenus MANUAL, PERMA- NENT ON/OFF, TIMER*, HOLIDAY, RANDOM the manual switching can be activated/programmed. Press MENU using select MANUAL and follow the indications on the display. MENU MANUAL ...
Override and permanent switching Override and permanent switching can be set using the menu in MANUAL or in normal mode (automatic screen) by direct keystroke (see figures). Activate override Briefly press key. Activate permanent switching Press key for 2 sec. Cancel override/permanent switching ...
OPTIONS In the menu OPTIONS the submenus OPERATING HOUR, LANGUAGE, PIN, EXTERNAL INPUT, FACTORY SETTINGS as well as INFO can be requested. Press MENU using select OPTIONS and follow the indications on the display. MENU OPTIONS ...
Enter PIN code The PIN-Code is set in OPTIONS via MENU the menu. If you have forgotten your PIN call the Theben Hotline. OPTIONS OPERATING HOUR EXT INPUT LANGUAGE WITH PIN NO PIN FACTORY CURRENT SETTINGS INFO...
External Input (only with TR 609 top2 S) For the channel an EXTERNAL INPUT (see figure) can be set with different functions. Press MENU using select EXT INPUT and follow the indications on the display. 3 submenus can be selected: Inactive, push button (function), switch (function) –...
Page 21
MENU OPTIONS OPERATING EXT INPUT* HOUR INACTIVE BUTTON* SWITCH OVERRIDE TIMER PERM ON PERM OFF TIMER HOUR MINUTE SECOND Use push button without glow lamp...
OBELISK top2 memory card Copy OBELISK Time switch This copies the switching program (all stan- Use memory card (see fig.) dard and special programs) and optionally all time switch (e.g. Position, offset, external Insert memory card in the time switch. input, time format etc..) from the memory card ...
Service address/Hotline Service address Theben AG Hohenbergstr. 32 72401 Haigerloch GERMANY Telephone +49 7474 692-0 Fax +49 7474 692-150 Hotline Telephone +49 7474 692-369 Fax +49 7474 692-207 hotline@theben.de Addresses, telephone numbers etc. www.theben.de The current OBELISK top2 PC software and the online version of the operating manual are available at www.theben.de...