Assigning A Station Number (Not For U.s.); Associated Dialing/Dialing Aid - Siemens HIPATH 2000 Operating Instructions Manual

Step by Step
Service
>
* 41=Temporary MSN?

Assigning a Station Number (Not for U.S.)

If this function has been configured (contact your ser-
vice personnel), you can selectively assign a specific
number (DID number) to your telephone before making
an external call. The assigned number then appears on
the called party's display.
Press the key. The LED lights up.
:
Select and confirm
or
qhe
Enter the code.
o
Enter the DID number you wish to use.
o
Dial the external number.

Associated Dialing/Dialing Aid

If this function has been configured (contact your ser-
vice personnel), you can use a dialing aid to dial num-
bers and set up calls for your telephone.
The operating procedure depends on whether the dial-
ing aid is connected to the S
You can also use your system telephone as a dialing aid
for other telephones.
Dialing aid on the S
On the PC, select a destination and start dialing.
n
The speaker on your telephone is switched on. Lift the
handset when the other party answers.
Dialing aid at the a/b (T/R) port:
On the PC select a destination and start dialing.
"Lift the handset" appears on the PC screen.
n
Lift the handset.
[1] "Different Displays (HiPath 4000 Environment)"
Making Calls – Convenience Functions
1
.
bus or the a/b (T/R) port.
0
bus:
0
Page 117
49